DISH Network Dish Pro Plus DPP Separator for Bell TV & Telus Satellite TV

C$14.95
  • Buy 2 for C$12.95 each and save 13%
  • Buy 5 for C$10.95 each and save 27%
  • Buy 10 for C$9.99 each and save 33%
  • Buy 50 for C$8.99 each and save 40%
Overview

The DISH Pro Plus Separator is to be used in conjunction with a DISH Pro Plus switch or LNBF to connect the two satellite tuner inputs of a DISH Pro Plus (dual-tuner) receiver using one cable.

BRAND:  
VIDEOPATH
PART #:  
DPP SEPARATOR
WARRANTY:  
12 MONTHS
Stock Status:  
In stock
AVAILABILITY:  
USUALLY SHIPS IN 1-2 BUSINESS DAYS
Product Code:  
Dish-Pro-Plus-DPP-Separator

DISH Network Dish Pro Plus DPP Separator for Bell TV & Telus Satellite TV
The DISH Pro Plus Separator is to be used in conjunction with a DISH Pro Plus switch or LNBF to connect the two satellite tuner inputs of a DISH Pro Plus (dual-tuner) receiver using one cable.

The DPP Separator is only compatible with the DPP TWIN or DPP QUAD LNBs, as shown below.


DPP TwinDPP Quad

Receiver Connectivity
? The DISH Pro Plus Separator must be used in conjunction with a DISH Pro Plus switch or LNBF to feed the satellite signal to both tuners of a DISH Pro Plus (dual-tuner) receiver for single-cable installations.
? The DP Plus Separator can only be used with DISH Pro Plus receivers and DISH 721. DISH Pro Plus receivers have a DISH Pro Plus logo.
? The DP Plus Separator cannot be used to connect two single tuner receivers.
? The DP Plus Separator cannot be used with DISH Pro LNBFs or Switches to provide the single cable benefit.
? If desired, the two satellite tuners of a DISH Pro Plus receiver can be connected to an LNBF or switch using two cables (instead of using a DP Plus Separator).

Additional Information
? As with all DISH Pro installations, cable and components between the LNBFs, switches, DP Plus Separator and receivers must be rated to 2150 MHZ and pass DiSEqC.
? Do not install the DP Plus Separator between diplexers.
? DISH Pro-approved splitters, diplexers, etc., cannot be substituted for a DISH Pro Plus Separator.

Why can?t I just use a DP-approved splitter?
Because it won?t work!

? A splitter merely feeds the same signal to two places.
? The DP Plus Separator was specially-designed to separate the single cable?s 950-1450 MHz band and the 1650-2150 MHz band, for the single cable to two tuner ?bandtranslating? technology.
DC & DiSeqC Pass, 950-2150 MHz. Used to separate a single line from a Dish 500 DPP twin lnb into two lines for use with DPP separator compatible two-input Dish Network receivers.
? Enables you to run 1 cable into the home and feed dual tuner DISH Pro Receivers (322, 921, 721*, 522, 622, 625 and 942) making installations a snap.
? When used with the DISH Pro Plus 44 Switch or a DISH Pro Plus Twin LNB dish, this product will allow you to run a dual tuner satellite receiver such as the 322, 921, 721*, 522, 622, 625 and 942 with a single RG6 cable from the dish.
? This product will not work without the use of a DISH Pro Plus Twin LNB (DPP) or a DISH Pro Plus 44 switch (DPP44). Please make sure that a DPP44 multiswitch is part of your system prior to purchase of the DP Separator
? The DP Separator will not work with a standard DISH Pro Twin LNB dish (DP)
? A DP Plus Separator allows a DP Plus dual-tuner receiver to be fed by a single cable ? it cannot be used to feed two single-tuner receivers.

More Information
PRODUCT TYPESATELLITE TV
BRANDVIDEOPATH
PART #DPP SEPARATOR
NETWORKBELL TV
Write Your Own Review
You're reviewing:DISH Network Dish Pro Plus DPP Separator for Bell TV & Telus Satellite TV
Your Rating

Product Questions

The DPP Separtor includes 2 six inch jumper cables to connect to the back of your PVR.

... Read more
Your Question:
© Copyright CanadaSatellite.ca All Rights Reserved.