Hughes 9502 Fixed BGAN M2M Standard Two Piece Terminal - Starter Kit

Sale Price: C$5,355.00
Based on a USD price of $4,250.00 and today's exchange rate.
Overview

9502 Beginner Starter Kit. Includes 2 9502 terminal kits (two‐piece model), 2 basic fixed mount kits, 2 IDU straps, 1 webinar training, and routine HSD startup support by phone and email.

BRAND:  
HUGHES
PART #:  
9502 2 PIECE STARTER KIT
WARRANTY:  
12 MONTHS
Stock Status:  
In stock
AVAILABILITY:  
USUALLY SHIPS IN 3-5 BUSINESS DAYS
Product Code:  
Hughes-9502-BGAN-M2M-Kit
Bundle Includes:
2 of Hughes 9502 BGAN M2M Terminal - 2 Piece (3500509-0001)   ( C$0.00 Value!)
2 of Hughes 9502 IDU Strap (3500617-0001)   ( C$0.00 Value!)

* Required Fields

Your Customization
Hughes 9502 Fixed BGAN M2M Standard Two Piece Terminal - Starter Kit
Hughes 9502 Fixed BGAN M2M Standard Two Piece Terminal - Starter Kit

In stock

+
-

C$5,355.00

Summary
    Hughes 9502 Fixed BGAN M2M Standard Two Piece Terminal - Starter Kit
    The world's most cost-effective, all-IP BGAN machine-to-machine satellite terminal with exceptionally low power consumption.
    The Hughes 9502 IP satellite terminal provides reliable connectivity over the Inmarsat Broadband Global Area Network (BGAN) for IP SCADA and machine-to-machine (M2M) applications. The Hughes terminal delivers affordable, global, end-to-end IP data connectivity enabling applications in industry sectors such as environmental monitoring, SmartGrid, pipeline monitoring, compressor monitoring, well site automation, video surveillance, and out-of-band management to primary site communications.

    The exceptional low power consumption (<1 W idle) of the Hughes 9502 makes it possible to provide end-to-end IP connectivity to sites that are off the grid. This breakthrough provides end-to-end IP connectivity to power-challenged locations that rely upon solar battery arrays involving sensitive power budgets.

    The Hughes 9502 includes 10 meters of RF cabling, granting the user freedom to position the antenna remotely and away from the transceiver in complex installations while securing the SIM card inside a premise or enclosure to better protect against unauthorized use, theft, and vandalism.

    Future firmware releases would be uncommon, meanwhile any such modem update will qualify for no charge over-the-air (OTA) upgrades saving customers time and money. At less than a penny or two per kilobyte, customers cannot find better value from comparable technologies.

    Main Features

    ? No connection charge with BGAN M2M (normal BGAN charge is 100K)
    ? Minimum CDRs only 1K (normal BGAN charge is 10K)
    ? No charge over-the-air modem software upgrades
    ? Exclusive airtime packages unique to the Hughes 9502
    ? Integrated IP Watchdog to ensure "always-on" network connectivity. No manual intervention required to recover from an outage
    ? Auto-on/auto-context activation automatically restores power and PDP connection to itself following loss of power and/or IP connection
    ? Remote control via SMS?remote management platform for command and control to the terminal using SMS, including configuration, debugging, and access to Web interface
    Ultra-low power consumption
    ◦ Transmit: < 20 W
    ◦ Narrow beam w/o transmit: 3 W
    ◦ Idle (regional beam): < 1 W
    ◦ Off (wake on packet): < 10 mW (@ 12 Vdc)
    ◦ Off (wake on packet): < 30 mW (@ 24 Vdc)
    ◦ Off (GPIO control): < 3 mW (@ 12 Vdc)
    ◦ Off (GPIO control): 0

    The input power requirements for the 9502 are: 2A @ 12V +/-10% or 1A @ 24V +/-10%. The minimum input voltage is 10V, but it can go down to 8.2V before the terminal will shut itself down (brown out). The maximum voltage is 26.4V. We have a bit of head room on the upper side as well, but the power cannot go above 28V, without the terminal shutting itself down.

    ? Relay mode passes WAN IP address to the connected RTU
    ? Security enhancements with extended layers of embedded security options
    ? Basic installation; no PC required
    ? Outdoor unit (ODU) can be pole mounted
    ? Indoor unit (IDU) is housed inside building or the remote terminal unit (RTU)
    ? Built-in GPS receiver

    Interfaces
    ◦ Ethernet connection (RJ45)
    ◦ USB?Type B for connection to configuration PC
    ◦ RS-232 (DB9) to external NMEA 0183-based GNSS device (e.g., GLONASS receiver)
    ◦ TNC connection on the IDU to the external antenna

    Accessories
    ◦ Modem (IDU) strap
    ◦ Antenna basic fixed mount kit
    ◦ Antenna azimuth elevation bracket
    ◦ Extended warranty options
    Specifications

    Satellite TX Frequency:
    1626.5?1660.5 MHz
    Satellite RX Frequency:
    1525?1559 MHz
    GPS Frequency:
    1574.42?1576.42 MHz
    SAT Continuous TX Time:
    Up to 3.25 hours at 128 kbps
    SAT Continuous RX Time:
    Up to 5.5 hours at 128 kbps
    SAT Standby Time:
    Up to 36 hours
    IDU Weight:
    < 1.5 Kg (3.3 lbs)
    IDU Dimensions:
    150 mm x 216 mm x 45 mm
    ODU Weight:
    < 1.9 Kg (excludes mount and cable)
    ODU Dimensions:
    385 mm x 385 mm x 33 mm
    Operating Temperature:
    -40˚ C to +75˚ C
    Storage Temperature:
    -55˚ C to +75˚ C
    Humidity:
    95% RH at +40˚ C
    ODU Wind Loading:
    Survival wind loading (with optional mount) up to 100 mph
    IDU Water & Dust:
    ODU Water & Dust:
    IP-40 Compliant
    IP-65 Compliant
    Input Voltage:
    +12 Vdc/+24 Vdc nominal
    Firmware Upgrades:
    Over the air or local
    More Information
    PRODUCT TYPE SATELLITE INTERNET
    USE TYPE FIXED
    BRAND HUGHES
    PART # 9502 2 PIECE STARTER KIT
    NETWORK INMARSAT
    USAGE AREA GLOBAL (EXCEPT POLAR REGIONS)
    SERVICE INMARSAT BGAN M2M

    Inmarsat BGAN M2M Coverage Map


    Inmarsat BGAN M2M Coverage Map

    Write Your Own Review
    You're reviewing:Hughes 9502 Fixed BGAN M2M Standard Two Piece Terminal - Starter Kit
    Your Rating

    Product Questions

    Your Question: