PUDU SH1 Smart Upright Scrubber Dryer (10220-000006)

PUDU SH1 Smart Upright Scrubber Dryer (10220-000006)

Pudu emphasizes efficiency claims versus conventional mops—such as reduced cleaning time and lower water/chemical usage—alongside industrial-style cleaning performance metrics including 27 kg brush pressure, 350 rpm brush speed, and 20,000 Pa suction power.

In addition to floor cleaning, the SH1 is promoted as a “multidimensional cleaning” system that can be extended with accessories for edge cleaning, low-profile spaces, and certain vertical or hard-to-reach surfaces (e.g., glass panels, tiled walls, or display cases).

Design and Features

Upright form factor for maneuverability

The SH1 is designed as a walk-behind upright unit that aims to deliver scrubber-dryer performance while remaining easier to steer than larger ride-on or wide walk-behind machines. Pudu lists the product dimensions as 49 × 53 × 120 cm, which places it in the “compact scrubber” category typically used for corridors, small retail areas, restrooms, and classrooms.

Instant scrub-and-dry cleaning

A defining feature of a scrubber dryer is the ability to apply solution, scrub, and immediately recover dirty water, leaving the surface drier and reducing slip risk compared with wet mopping. Pudu frames SH1’s “instant scrub-and-dry capability” around a brushless motor and a squeegee system that dries the floor quickly to help avoid “secondary pollution” (re-depositing dirty water).

Air–liquid–debris separation

Pudu highlights a wastewater tank design described as a first-to-market system with air–solid–liquid separation, intended to separate gases, liquids, and solid particles for simpler disposal and to reduce clogging risk. This design is positioned as helpful when cleaning environments where both wet and dry debris may be present.

“Multidimensional” and accessory-based cleaning

The SH1 is marketed as adaptable beyond standard flat floors through accessory use cases such as:

• Edge cleaning (near walls and corners)

• Low-profile space cleaning (under furniture or fixtures)

• Dead zone/hard-to-reach area cleaning

• Horizontal surface and some vertical surface cleaning with attachments

Touchscreen interface and cleaning reports

Pudu promotes a touchscreen interface and a “PUDU Cleaning Report” concept that provides post-cleaning summaries such as cleaning duration, water usage, and cleaned area. The interface is also described as supporting component/consumable monitoring and on-screen training prompts.

Modular, quick-release maintenance

The SH1 is described as having a quick-release modular design for routine service tasks, including removal and reattachment of scrubbing brushes, squeegees, water tanks, and batteries, aimed at reducing downtime between shifts.

Technology and Specifications

Cleaning mechanics: pressure, speed, and suction

Pudu’s published performance figures for the SH1 focus on three main cleaning drivers:

• Brush pressure: 27 kg

• Brush speed: 350 rpm

• Suction power: 20,000 Pa

In practical terms, brush pressure and speed influence mechanical agitation for soil removal, while suction and squeegee effectiveness determine how well dirty solution is recovered and how quickly floors dry.

Tank capacities and productivity

Pudu lists the SH1 with:

• Solution tank: 4 L

• Recovery (wastewater) tank: 4 L

• Cleaning productivity: 1100–1600 m²/h

These capacities indicate a machine designed for frequent refills/empties during continuous operation—typical for compact scrubbers—balanced by improved maneuverability and storage simplicity.

Dimensions, working widths, and noise

Published specifications include:

• Dimensions: 49 × 53 × 120 cm

• Working width: 44 cm

• Squeegee width: 49 cm

Noise figures are provided by Pudu as:

• Standard mode: 72 dB(A)

• ECO mode: 69 dB(A)

Battery and operating time

Pudu lists:

• Battery capacity: 18 Ah

• Run-time: 70 minutes (Standard) / 100 minutes (ECO)

• Charging time: 2.5 hours

This run-time range is consistent with compact, cordless scrubber dryers optimized for short-to-medium duty cycles and quick redeployment.

Cleaning modes and consumables

Pudu shows multiple modes, including Normal, Heavy Duty, ECO, Low Residue, Soak, Water Suction, and accessory-related modes/settings. It also lists consumables such as brushes/pads in multiple hardness levels and different squeegee rubber materials.

Applications and Use Cases

Retail and supermarkets

Compact scrubber dryers are commonly used in aisles, entry zones, and back-of-house corridors where frequent spot cleaning is needed without blocking traffic. Pudu explicitly lists supermarkets and retail among SH1’s targeted industries.

Healthcare and clinics

Healthcare environments often prioritize fast drying, consistent results, and simple maintenance to support frequent cleaning cycles. Pudu includes healthcare as a target vertical and presents SH1 as suited to routine cleaning where quick turnaround is valuable.

Hospitality and restaurants

In hospitality, compact scrubber dryers are often used for lobby edges, kitchen-adjacent corridors, and restrooms—areas that accumulate grease, tracked-in debris, or spills and benefit from immediate water recovery. Pudu lists hospitality and food & beverage among relevant industries.

Education and public buildings

Schools and public facilities typically need reliable cleaning in classrooms, hallways, and restrooms where maneuverability matters. Pudu lists education and public-transport scenarios among SH1’s usage examples.

Advantages / Benefits

Faster results than wet mopping for routine cleaning

Pudu positions the SH1 as improving cleaning efficiency and reducing water/chemical usage compared with conventional mopping, paired with scrub-and-dry recovery to reduce lingering wetness on the floor.

Compact productivity for tight spaces

With a 44 cm working width and compact footprint, the SH1 targets places where larger machines are impractical, while still offering published productivity figures (1100–1600 m²/h) associated with mechanized scrubbing.

Maintenance-oriented design

Features such as modular quick-release components and air–liquid–debris separation are positioned to simplify disposal and reduce downtime between cleaning cycles.

Recognition in industrial design (reported by manufacturer)

Pudu Robotics reports that the SH1 received an iF Design Award 2025, highlighting the product’s industrial design and usability positioning.

FAQ 

What is the PUDU SH1 Smart Upright Scrubber Dryer (10220-000006)?

The PUDU SH1 is a compact, professional upright scrubber dryer that scrubs floors with a powered brush and immediately recovers dirty water with a squeegee and suction system.

How does the PUDU SH1 work?

The SH1 applies cleaning solution, scrubs at 350 rpm with 27 kg brush pressure, and uses 20,000 Pa suction plus a squeegee to collect wastewater into a recovery tank, leaving the floor drier than mopping.

Why is the PUDU SH1 important?

It is designed to improve routine cleaning efficiency in commercial spaces by combining mechanical scrubbing with immediate water recovery, plus monitoring/reporting features and maintenance-oriented wastewater handling.

What are the benefits of the PUDU SH1?

Commonly cited benefits include scrub-and-dry cleaning, compact maneuverability, multiple cleaning modes, air–liquid–debris separation, and published performance figures for suction, brush pressure, and productivity.

Summary

The PUDU SH1 Smart Upright Scrubber Dryer (10220-000006) is a compact commercial floor-care machine designed to bridge the gap between manual mopping and larger industrial scrubbers. With published performance metrics—27 kg brush pressure, 350 rpm brush speed, 20,000 Pa suction—plus a 4 L solution tank and 4 L recovery tank, the SH1 targets fast, repeatable scrub-and-dry cleaning in tight, high-traffic environments. Its touchscreen interface, cleaning reports, and maintenance-focused separation system reinforce its positioning as a modern, “smart” upright scrubber dryer for professional facility cleaning.