Genisom M1 Pro Quadruped Robot

Most robot dogs on patrol can see. Far fewer can speak, listen and follow a specific person through a crowd. The Genisom M1 Pro adds exactly those abilities to GENISOM AI's rugged M1 platform. Alongside a 30 kg continuous payload and IP67 sealing, it carries a UWB tracking module, microphone and speaker, so security teams can talk through the robot, broadcast messages, record audio and have it follow a tagged operator on its own.

Key Features

30 kg Continuous Payload

The M1 platform is rated for about 30 kg of continuous operating load, enough to carry inspection sensors, communications gear or supplies on long missions.

IP67 Sealing and Wide Temperature Range

An integrated sealed design gives IP67 protection against dust and water, and the robot operates from -20 to 55 °C, covering heavy rain, dust, cold and heat at industrial sites.

All Terrain Mobility

GENISOM rates the M1 for continuous climbing of 25 cm steps, vertical obstacles up to 80 cm and slopes up to a 45° limit, with stable passage on snow and ice. Published specifications describe 16 degrees of freedom with a wheel leg layout of 3 plus 1 joints per leg.

Long Endurance with Hot Swap Batteries

Dual quick swap batteries let operators replace one pack without shutting the robot down. GENISOM lists a maximum no load endurance of 5 hours or 29 km, measured at 1 m/s. An optional smart charging station supports automatic return to charge when the battery runs low.

UWB Tracking and Voice Interaction

The Pro edition adds a UWB module, microphone and speaker. According to GENISOM, this supports voice dialogue, audio recording and broadcasting, and UWB with laser vision fusion tracking, so the robot can follow a tagged person and relay two way communication.

Local Video Storage and Patrol Modes

A 512 GB TF card stores video on board. Published specifications also list a stealth or silent mode, obstacle avoidance and patrol functions.

Open Expansion

The M1 platform offers 15 standard hardware interfaces for communication, power and control, compatible with additional payloads and computing modules.

Genisom M1 Pro Specifications

*According to published specifications. Confirm final values with your order.

Applications

• Security patrol: perimeter and park patrols with live voice warnings, audio broadcast and recorded evidence.
• Power and industrial inspection: carrying sensor payloads through substations, plants and pipe galleries.
• Emergency response: moving through rain, mud and shallow water while relaying voice between responders and people on site.
• Operator following: UWB tracking lets the robot follow a technician and carry tools or equipment.
• Logistics in difficult terrain: moving supplies across stairs, slopes and obstacles where wheeled carts cannot go.

Who Should Buy the Genisom M1 Pro?

Buy the M1 Pro if you need an industrial quadruped that can both carry real payloads and communicate in the field. It suits security integrators, facility and campus operators, utilities and emergency teams who want voice interaction, person following and local recording built in, rather than added later as custom payloads.

Which Should You Buy?

Before You Buy

• Define the mission: list payload weight, route length and terrain so endurance and load fit the job.
• Plan spare batteries: hot swap packs keep the robot running through long shifts; budget for extras.
• Consider the charging dock: add it if the robot will patrol unattended or overnight.
• Check radio and UWB rules: confirm wireless and UWB use is permitted where the robot will operate.
• Plan data handling: voice recording and video storage may fall under local privacy rules; set retention and access policies.
• Confirm software and integration: ask about navigation, SDK access and how the robot connects to your security or inspection platform.

Pricing and Availability

The Genisom M1 Pro is available to buy directly from this page. Current price and availability are shown at the top of the page. Add it to your cart to order, or add it to your quote for fleet orders, spare batteries, the charging dock or integration support.

Frequently Asked Questions

What is the Genisom M1 Pro?

The M1 Pro is an industrial quadruped robot based on GENISOM AI's M1 platform, adding a UWB tracking module, microphone and speaker for voice interaction, person following and patrol work.

How much can the Genisom M1 Pro carry?

The M1 platform is rated for about 30 kg of continuous operating load.

Is the Genisom M1 Pro waterproof?

The M1 has IP67 protection, meaning it is dust tight and protected against water, and operates from -20 to 55 °C.

How long does the M1 Pro run on a charge?

GENISOM lists up to 5 hours or 29 km with no load at 1 m/s, and dual hot swappable batteries allow longer missions.

What does the Pro edition add?

It adds UWB tracking, a microphone and speaker for voice intercom and broadcast, audio recording, UWB and LiDAR vision fusion tracking, 512 GB of local video storage, silent mode and patrol functions.

Can the M1 Pro charge itself?

Yes, with the optional Genisom M1 Charging Dock, which supports automatic return to charge at low battery.

How much does the Genisom M1 Pro cost?

The current price is shown at the top of this page. Add it to your quote for fleet or bundle pricing.

Where can I buy the Genisom M1 Pro?

You can buy it right here on this page. Add it to your cart or request a quote.

Summary

The Genisom M1 Pro pairs the M1's 30 kg payload, IP67 sealing and hot swap endurance with UWB following, two way voice and on board recording. For security patrols, inspection rounds and field teams that need a robot able to carry, follow and communicate, it is a capable, ready to deploy choice. If you are ready to buy, order the M1 Pro from this page or add it to a quote with batteries and a charging dock.