Genisom M1 RoamerX Pro Quadruped Robot

An industrial robot dog earns its keep on the routes nobody wants to walk: the 2 a.m. substation round, the long fence line in the rain, the plant corridor checked every hour. Driving it there by remote control saves a person the walk but still ties up an operator. The Genisom M1 RoamerX Pro is built to remove that operator from the loop. It pairs GENISOM AI's rugged M1 platform with RoamerX Pro navigation software, factory configured so the robot can map a site, localize itself and follow inspection and patrol routes on its own.

Key Features

RoamerX Pro Autonomous Navigation

RoamerX Pro provides mapping, localization, navigation, path planning and obstacle avoidance. With it configured at the factory, teams can build a map of their facility and set routes without developing a navigation stack themselves.

Wheel Leg Mobility

Each leg has three joints plus a driven wheel, for 16 degrees of freedom in total. The robot can roll quickly along roads and corridors, then step and climb when terrain gets rough. Published specifications list an extreme speed of 8 m/s and a rated maximum speed of 6 m/s.

30 kg Continuous Payload

The M1 platform carries about 30 kg of continuous working load, enough for inspection sensors, thermal cameras, gas detectors or communications equipment on long routes.

IP67 Sealing and Wide Temperature Range

An integrated sealed design gives IP67 protection against dust and water, and the M1 operates from -20 to 55 °C, covering heavy rain, dust, cold nights and hot industrial sites.

All Terrain Capability

GENISOM rates the M1 for continuous climbing of 25 cm steps, vertical obstacles up to 80 cm and slopes up to a 45° limit, with stable passage on snow and ice.

Long Endurance and Hot Swap Batteries

Published specifications list at least 5 hours of runtime unloaded and at least 3.5 hours fully loaded. Dual hot swappable batteries let operators replace a pack without shutting down, and an optional smart charging station supports automatic return to charge for around the clock operation.

Open Expansion

Fifteen standard hardware interfaces for communication, power and control accept additional payloads and computing modules.

Genisom M1 RoamerX Pro Specifications

*According to published specifications. Confirm final values with your order.

M1 RoamerX Pro vs M1 Pro

Applications

• Power and utility inspection: scheduled autonomous rounds at substations, plants and pipe galleries.
• Security patrol: repeated perimeter and campus routes, day and night, without a driver.
• Industrial facility monitoring: regular checks of equipment, gauges and walkways.
• Remote site monitoring: recurring routes at locations with few or no staff on site.
• Logistics across rough ground: moving equipment and supplies over stairs, slopes and obstacles.

Who Should Buy the M1 RoamerX Pro?

Buy the M1 RoamerX Pro if you want an IP67, high payload quadruped that can run routes by itself instead of being driven. It suits utilities, facility operators, security providers and integrators deploying recurring inspection or patrol missions, especially when paired with the charging dock for unattended operation.

Which Should You Buy?

Before You Buy

• Confirm the sensor package: ask which LiDAR, cameras and computing hardware ship with this edition to support RoamerX Pro.
• Map your routes: list route length, terrain, stairs and slopes so runtime and payload fit the mission.
• Plan charging: add spare batteries for long shifts and the charging dock for unattended rounds.
• Check software terms: ask about RoamerX Pro licensing, updates and multi floor or multi site support.
• Integrate your systems: confirm how the robot reports data and alerts to your security or inspection platform.
• Plan site safety: define where the robot may operate autonomously and how people are alerted.

Pricing and Availability

The Genisom M1 RoamerX Pro is available to buy directly from this page. Current price and availability are shown at the top of the page. Add it to your cart to order, or add it to your quote for fleet orders, spare batteries, the charging dock or integration support.

Frequently Asked Questions

What is the Genisom M1 RoamerX Pro?

It is an industrial wheel leg quadruped based on GENISOM AI's M1 platform, factory configured with RoamerX Pro software for autonomous navigation.

What does RoamerX Pro do?

RoamerX Pro provides mapping, localization, navigation, path planning and obstacle avoidance, allowing the robot to follow routes on its own.

How much can the M1 RoamerX Pro carry?

The M1 platform is rated for about 30 kg of continuous working load.

How fast is it?

Published specifications list an extreme speed of 8 m/s and a rated maximum speed of 6 m/s.

How long does it run?

It runs for at least 5 hours unloaded and at least 3.5 hours fully loaded, according to published specifications, with hot swappable batteries for longer missions.

Is the M1 RoamerX Pro waterproof?

The M1 is rated IP67, meaning it is dust tight and protected against water, and operates from -20 to 55 °C.

What is the difference between the M1 RoamerX Pro and M1 Pro?

The RoamerX Pro edition focuses on autonomous navigation. The M1 Pro adds UWB tracking, a microphone and speaker for voice interaction, following and local recording.

How much does the Genisom M1 RoamerX Pro cost?

The current price is shown at the top of this page. Add it to your quote for fleet or bundle pricing.

Where can I buy the Genisom M1 RoamerX Pro?

You can buy it right here on this page. Add it to your cart or request a quote.

Summary

The Genisom M1 RoamerX Pro combines the M1's 30 kg payload, IP67 sealing, wheel leg speed and hot swap endurance with factory configured RoamerX Pro navigation. For utilities, facilities and security teams that need recurring routes done without a driver, it turns the M1 into an autonomous worker. If you are ready to buy, order it from this page or add it to a quote with spare batteries and the charging dock.