Bell TV DPP Quad LNB (For 3 or 4 Receivers) - FINAL CLEARANCE

Out of stock

BRAND:
BELL TV
PART #:
DISH PRO PLUS QUAD LNB
Warranty:
12 MONTHS
AVAILABILITY:
CURRENTLY UNAVAILABLE
SKU:
Dish-Pro-Plus-Quad-LNB

Dish Network Dish Pro Plus Quad LNBF (DPP Quad LNB)
Designed to be used with the DISH 500 Antenna. Use to capture signals from both Dish Network satellites (119° and 110°) OR use it to capture signals from both Bell TV satellites (92° and 81°). 22 KHz switches are built-in and weather-proof. Supports ONE or TWO, THREE OR FOUR DISH Network or Bell TV satellite receivers, fits into existing Y adapter.

DISH Pro Quad has four output ports and contains an internal switch allowing it to receive from both the 110° and 119° or 82° and 91° orbital locations. It can connect directly to:
- Up to four Bell TV or Dish Network single-tuner receivers
- Up to four Bell TV or Dish Network dual-tuner receivers.

In addition when used with the DPP Separator (purchased separately) enables you to run 1 cable into the home and feed dual tuner DISH Pro Receivers (322, 921, 721*, 522, 625, 622,and 942) or Bell TV 9400, 9241 and other dual tuner receivers making installations a snap.

Specifications

PART # DISH PRO PLUS QUAD LNB
PRODUCT TYPE SATELLITE TV
USAGE AREA CANADA
BRAND BELL TV
NETWORK BELL TV, DISH NETWORK, TELUS SATELLITE TV
USE TYPE FIXED
ACCESSORY TYPE LNB

Product Questions

 There are 2 ways.  The first is to get an SW44 expansion kit which will give you a total of 8 outputs, or you can replace your lnbs and switch and get a DPP Quad LNB and 2 DPP separators, one for each PVR.  Both of these methods will work for your scenario.  

Read more
Your Question:
Write a Review
You're reviewing: Bell TV DPP Quad LNB (For 3 or 4 Receivers) - FINAL CLEARANCE
loader
Loading...

You submitted your review for moderation.

Customer Support